We need to mount the line follower on the base on the robot in the centre. After some quick research I found that, for it
Last Weekend, we made an amplifier, so we can add lemming sound effects. You might be thinking that adding Lemming Sound Effects IS NOT the
And this is why you charge the LIPO’s in a fire proof bag and stay close! After an afternoon of driving around and testing the
The two motor controllers contain five connections in each. They also come with a 5 pin jst connector on each board. This job was to
Prior to building the actual robot we need to be able to test the components we are going to use on an old chassis. This
Short answer: No The test setup used the same cable as before, but with the V+ cable removed. Thusly it was powered from the 2xAA
Prior to building the actual robot we need to be able to test the components we are going to use on an old chassis. This
Spoiler alert: It was me. The goal was to test out both the PiBorg UltraBorg and Sunfounder Servo Driver boards and ensure the Pi could
A few years back we bought a Pi Hut wireless controller at the fantastic Raspberry Fields, which I’m sad to say that despite the varied