Challenge Accessories, Design

Building the tree for natures bounty

In a few hours we had spare, I built the tree with additional help from Dad.

The first step was to draw it out, after that we made sure that the measurements were correct, they were. The third step was to use a knife to cut it out.

Finally we had one half! Then we drew around the half we had and cut out the drawing, each one had a slit going half way and we slot the them together. We needed some supports so we have some carboard supports with glue on but we had to use some binder clips to make sure that the carboard stayed in the right place while they dried. Now all we need to do is paint it then the tree is finished!

We also have made a box for it as shown in the picture at the bottom.

Please follow and like us: