{"id":579,"date":"2021-12-31T19:15:17","date_gmt":"2021-12-31T19:15:17","guid":{"rendered":"http:\/\/www.thelemmingfarm.uk\/?page_id=579"},"modified":"2022-02-08T22:25:39","modified_gmt":"2022-02-08T22:25:39","slug":"useful-links-to-challenge-accessories","status":"publish","type":"page","link":"http:\/\/www.thelemmingfarm.uk\/?page_id=579","title":{"rendered":"Models\/Links for Challenges"},"content":{"rendered":"\n
\n
\n
\n
\n
\n
\n
Wolf<\/a>Download<\/a><\/div>\n\n\n\n
\"\"<\/figure><\/div>
\"\"<\/figure><\/div>
\"\"<\/figure><\/div><\/div><\/div><\/div>\n\n\n\n
\n
\n

1x Wolf in Shepherd’s Pi.<\/p>\n\n\n\n

Need (3). <\/p>\n<\/div>\n\n\n\n

\n

Estimated Printing Time: 2 hours 57 mins (including heating of printer). Estimated Plastic Usage: 10.30 m <\/p>\n<\/div>\n<\/div>\n\n\n\n

The stl file is available above and conforms to the wolf defined in Shepherds Pi Rules<\/a> of a main piece of 100mm by 150mm, and a base cross piece of 150mm length.<\/p>\n\n\n\n

We have made it to print in two pieces that slot together and both are contained in the same stl file.<\/p>\n<\/div>\n\n\n\n

\n
Sheep<\/a>Download<\/a><\/div>\n\n\n\n
Sheep_body<\/a>Download<\/a><\/div>\n\n\n\n
Sheep_lid<\/a>Download<\/a><\/div>\n\n\n\n
\"\"<\/figure><\/div>
\"\"<\/figure>
\"\"<\/figure><\/div><\/div><\/div><\/div>\n\n\n\n
\n
\n

1x Sheep in Shepherd’s Pi.<\/p>\n\n\n\n

Need (6).<\/p>\n<\/div>\n\n\n\n

\n

Estimated Printing Time: 5h38m (body), 0h54m (lid), 6h30m (combined)<\/p>\n\n\n\n

Estimated Plastic Usage: 17.45m (body), 2.78m (lid) 20.19m (combined) <\/p>\n<\/div>\n<\/div>\n\n\n\n

\n
\n

The stl file is available above and conforms to the sheep defined in Shepherds Pi Rules<\/a> of a cuboid with: <\/p>\n\n\n\n